Options and Accessories - Beach House On-shore Series Desalination Systems

Semi-Automatic Fresh Water Flush - ₤ 298 (ECHOTec recommended)

The semi-automatic fresh water flush is activated at the touch of a button at a factory set and user adjustable flush duration. This feature eliminates manual timing and forgetting to close the fresh water flush valve after the manual flush cycle.

Automatic Fresh Water Flush - ₤ 320

The fresh water flush is automatically performed after every use of the desalination system at a factory set and user adjustable flush duration. The automatic flush timer can also be activated at the touch of a button to extend the membrane storage time without running the desalination system. 

Product Diverter / TDS Monitor - ₤ 395 (ECHOTec recommended)

The automatic product diverter / TDS monitor constantly displays the product salinity on the LCD screen. On start-up, once the product water meets the factory set and user adjustable quality level, the product is diverted to the freshwater storage tank.

The failsafe (never allows unsafe product to enter tank) diverter valve has a manual override option (allows manual sampling and tank filling).

Seawater Supply Pump - ₤ 560
(all systems except 400-BHL-1, 700-BHL-2, 5000-BHL-3, 10K-DUAL-8)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 30ft/9m above sea or well water level (please view the installation layout). In connection with the optional reservoir, the feed pump can prime up to 9ft / 2,7m. Multiple pumps can be used in-line for higher lift or long vertical intake lines.
Available for all power options.

Seawater Supply Pump - ₤ 298
(all systems except 5000-BHL-3, 10K-DUAL-8)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 10ft/3m above feed water level. In connection with the optional reservoir the feed pump primes up to 7ft / 2,1m. Multiple pumps can be used in-line for higher lift or long vertical intake lines. Available in 115/230V AC, 50/60Hz, single phase only.

Submersible Seawater Supply Pump - ₤ 340
(systems 400-BHL-1 and 700-BHL-2 only)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 7ft / 2,1m without the need for a priming reservoir. Multiple pumps can be used in-line for higher lift or long vertical intake lines. This pump is water cooled and can be installed above water. Available in 115/230V AC, 50/60Hz, single phase only.

Priming Reservoir - ₤ 78

In connection with the seawater feed pump, the reservoir allows suction
up to 9ft / 2,7m.

Maintenance Kit - ₤ 215

10 Pre-filters, 5 and/or 20 micron (2 ½” x 10”) 

2 Active carbon filters (fresh water flush)
  1 Ltr. High-pressure pump oil

Extended Maintenance Kit - ₤ 80

  1 Acid cleaning compound (11.5 oz – 330 g)
  1 Alkaline cleaning compound (11.5 oz – 330 g)
  2 Storage compounds, Biocide (11.5 oz – 330 g)
  1 Complete spare seal and O ring kit (except high pressure pump)

Consumables

 

BB 5 micron pre-filter cartridge

BB 20 micron pre-filter cartridge

Active carbon cartridge

pH neutralizer / mineral cartridge

Sea strainer screen

Membrane element 2½" x 21"

Membrane element 2½" x 40"

Biocide / Storage compound

Alkaline cleaner

Acid cleaner

High Pressure Pump valve kit

High Pressure pump seal kit (Water and Oil) – Modular

High Pressure pump seal kit (Water and Oil) – Vertical

 

14.60

14.60

11.80

42.70

13.10

171.00

225.00

6.20

9.30

9.30

84.10

102.80

140.20

Order by phone or e-mail. Wire transfer or Visa/MasterCard accepted.
parts@echotecwatermakers.com     Tel: + 868 634 2027

Echo-Marine Ltd.

Mariners Haven, 1st Ave South,

Chaguaramas, Trinidad, W.I.

Tel.:  +1 868-634-2027 / 2015

International Websites with prices in local currency

© Echo-Marine Ltd. 2020