Options and Accessories - Small Generator / Inverter Series

Boost pump - US$ 196 (only for dry locations - recommended for models 260, 310, 390, 510, 690, 780)
If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.
1 Magnetic (no seal/no leak - ceramic shaft) Boost Pump, Switch for control panel, 5/8" intake hose barb, 1/2" outlet hose barb, 4 feet / 1.2 meter 5/8" wire reinforced intake hose, 10 feet / 3 meter 1/2" braided feed hose. Includes additional 5 micron pre-filter assembly and cartridge.

Boost pump - US$ 239 (submersible - recommended for models 260, 310, 390, 510, 690, 780)
If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.
1 Magnetic (no seal/no leak - ceramic shaft) submersible Boost Pump, Switch for control panel, 5/8" intake hose barb, 1/2" outlet hose barb, 4 feet / 1.2 meter 5/8" wire reinforced intake hose, 10 feet / 3 meter 1/2" braided feed hose. Includes additional 5 micron pre-filter assembly and cartridge

Boost pump - US$ 365 (drip proof - recommended for models 1000, 1200,1300, 1400, 1500)
If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.
1 Magnetic (no seal/no leak - ceramic shaft) submersible Boost Pump, Switch for control panel, 3/4" intake hose barb, 5/8" outlet hose barb, 4 feet / 1.2 meter 3/4" wire reinforced intake hose, 10 feet / 3 meter 5/8" braided feed hose. Includes additional 5 micron pre-filter assembly and cartridge.

Boost pump - US$ 345 (submersible - recommended for models 1000, 1200,1300, 1400, 1500)
If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.
1 Magnetic (no seal/no leak - ceramic shaft) submersible Boost Pump, Switch for control panel, 3/4" intake hose barb, 5/8" outlet hose barb, 4 feet / 1.2 meter 3/4" wire reinforced intake hose, 10 feet / 3 meter 5/8" braided feed hose. Includes additional 5 micron pre-filter assembly and cartridge.
5 Micron Pre-filter housing - Free of charge
The additional 5 micron pre-filter is only recommended in connection
with the optional boost pump
1 Filter housing, 1 pre-filter cartridge, 1 bracket, 1 3/4" NPT nipple

Low pressure gauge - US$ 85
The low pressure gauge indicates when the pre-filters have to be changed or the through-hull becomes clogged (barnacles etc.).
Low pressure gauge (AISI 316 housing / Monel bourdon tube) -30 +60PSI, ¼”NPT thread in filter housing, 316SS bracket with cutout for gauge.

Fresh water flush kit - US$ 125
The fresh water flush kit enables you to store your watermaker for up to 10 days without the use of chemicals (biocide). The fresh water flush storage can be repeated every 10 days.
Kit contains: 1 Filter housing, 1 active carbon cartridge, 1 bracket (AISI 316SS), 8 screws, 1 shut off valve, 2 hose barb connectors, 1 Nylon nipple, 1 Nylon tee, 10 ft. braided hose, 5 hose clamps (AISI 316SS).

Custom DUPLEX Upgrade - US$ 320
DUPLEX 1.4462 (similar to 2205) is more costly and more difficult to form and machine but achieves almost twice the corrosion resistance of 316 stainless steel. DUPLEX has been successfully used for all high pressure fittings and pressure regulators of ECHOTec commercial desalination systems for the past 10 years. The custom Duplex upgrade is now available as an option for yacht watermakers.
The Duplex package comes with a lifetime warranty (If for any reason, a DUPLEX regulator or fitting ever fails, we replace it. Period).
Maintenance Kit - US$ 148
10 Pre-filters, 5 and/or 20 micron (2 ½” x 10”)
1 Spare sea strainer screen
2 Active carbon filters (fresh water flush)
1 Ltr. High-pressure pump oil
Extended Maintenance Kit - US$ 125
2 DC motor brushes
1 Acid cleaning compound
1 Alkaline cleaning compound
2 Storage compounds (Biocide)
1 Complete spare seal and O ring kit (except high pressure pump)
Consumables
5 / 20 micron pre-filter cartridge
5 / 20 micron pre-filter cartridge 10 pcs.
Active carbon cartridge
pH neutralizer / mineral cartridge
Sea strainer screen
Membrane element 2½" x 21"
Membrane element 2½" x 40"
Biocide / Storage compound
Alkaline cleaner
Acid cleaner
DC motor brushes (pair)
Timing Belt
High Pressure Pump valve kit
High Pressure pump seal kit (Water and Oil)
US$
9.90
85.00
19.00
68.50
21.00
225.00
295.00
9.90
14.90
14.90
48.00
20.00
20.00
165.00
Order by phone or e-mail. Wire transfer or Visa/MasterCard accepted.
parts@echotecwatermakers.com Tel: + 868 634 2027
Please contact us with your enquiry/order